Analisis Waktu dan Suhu Pengeringan Chips terhadap Mutu Tepung Gembili (Dioscorea esculenta L.)
Analysis of Drying Time and Temperature of Chips on the Quality of Gembili Flour (Dioscorea esculenta L.)
DOI:
https://doi.org/10.51852/jaa.v7i1.580Keywords:
drying, flour, gembili, quality, temperatureAbstract
Gembili tuber is one of the local foods of the Papuan people and has the potential to be developed into derivative products. Gembili tubers need to be made into flour before being processed further. Drying in the flouring process is a crucial stage because it determines the quality of the gembili flour produced. The drying temperature of gembili chips that is less than optimal will result in low flour quality. The purpose of this study was to obtain the optimal temperature and drying time for gembili chips. The method used in this research is the experimental method. Gembili chips were dried at 60oC, 70oC, and 80oC. Each drying temperature was 6, 8, and 10 hours with three replications. Gembili chips were milled using a blender at 1800 rpm. Drying is done mechanically using an electric oven. Sifting using tyler size 70 mesh. Testing the quality of gembili flour fineness modulus, yield, whiteness degree, and water content. Study results, namely the temperature and drying time of gembili chips affect the quality of gembili flour produced. The best gembili flour based on the perangkingan method was obtained from variations in the drying treatment at 60oC with a drying time of 10 hours for gembili chips. The characteristics of gembili flour in the best treatment were as follows: water content of 1,29%, whiteness degree of 87,10%, fineness modulus of 0,35, and yield of 20,20%.
References
Bahar YH. 2017. Efisiensi proses pengeringan dan uji hasil cabai kering dan cabai bubuk untuk peningkatan daya simpan cabai merah. Jurnal Agroekoteknologi dan Agribisnis, 1(2): 39–47. https://doi.org/10.51852/JAA.V1I2.162.
Deus VL, Silva CEMB de, Maciel LF, Miranda LCR, Hirooka EY, Soares SE, Ferreira E de S, Bispo E da S. 2018. Influence of drying methods on cocoa (Theobroma cacao L.): antioxidant activity and presence of ochratoxin A. Food Science and Technology. 38 (1): 278–285. https://doi.org/10.1590/fst.09917.
Dimyati A, Kuntarsih S, Iswari D, Salampessy NY. 2009. Meeting the requirements of international market for salacca (case study: export challenge of salacca “Pondoh” variety to China). International Food And Agribusiness Management Association. 1–17. https://www.ifama.org/2009-Symposium.
Erni N, Kadirman, Fadilah R. 2018. Pengaruh suhu dan lama pengeringan terhadap sifat kimia dan organoleptik tepung umbi talas (Colocasia esculenta). Jurnal Pendidikan Teknologi Pertanian. 4 (1): 95–105. https://doi.org/10.26858/JPTP.V1I1.6223.
Iswari K, Hastuti HF, Srimaryati. 2016. Pengaruh lama fermentasi terhadap mutu tepung cassava termodifikasi. Prosiding Seminar Nasional Membangun Pertanian Modern dan Inovatif Berkelanjutan dalam Rangka Mendukung MEA. 10(1): 42–49. https://repository.pertanian.go.id/handle/123456789/ 6548.
Lisa M, Lutfi M, Susilo B. 2015. Pengaruh suhu dan lama pengeringan terhadap mutu tepung jamur tiram putih (Plaerotus ostreatus). Jurnal Keteknikan Pertanian Tropis dan Biosistem. 3 (3): 270–279. https://doi.org/10.21776/JKPTB.V3I3.293.
Lubis IH. 2008. Pengaruh lama dan suhu pengeringan terhadap mutu tepung pandan [Skripsi]. Medan: Universitas Sumatera Utara. https://repositori.usu.ac.id/handle/123456789/51824.
Martunis. 2012. Pengaruh suhu dan lama pengeringan terhadap kuantitas dan kualitas pati kentang varietas granola. Jurnal Teknologi Dan Industri Pertanian Indonesia. 4 (3): 26–30. https://doi.org/https://doi.org/10.17969/jtipi.v4i3.740.
Ondikeleuw M, Malik DA. 2020. Prosiding Seminar Nasional Kesiapan Sumber Daya Pertanian dan Inovasi Spesifik Lokasi Memasuki Era Industri 4.0 KAJIAN ETNOBOTANI BUDIDAYA GEMBILI (Dioscorea sp.) DI PAPUA. Prosiding Seminar Nasional Kesiapan Sumber Daya Pertanian dan Inovasi Spesifik Lokasi Memasuki Era Industri 4.0, 637–646. https://repository.pertanian.go.id/server/api/core/bitstreams/ 873bacba-2ee5-4c30-b63f-d9fab2d96df0/content.
Putri NA, Herlina H, Subagio A. 2018. Karakteristik mocaf (modified cassava flour) berdasarkan metode penggilingan dan lama fermentasi. Jurnal Agroteknologi. 12 (01): 79–89. https://doi.org/10.19184/J-AGT.V12I1. 8252.
Rauf AW, Lestari MS. 2009. Pemanfaatan komoditas pangan lokal sebagai sumber pangan alternatif di Papua. Jurnal Penelitian dan Pengembangan Pertanian. 28 (2): 54–62. https://doi.org/10.21082/JP3.V28N2.2009. P54.
Richana N, Sunarti TC. 2004. Karakterisasi sifat fisikokimia tepung umbi dan tepung pati dari umbi ganyong, suweg, ubi kelapa, dan gembili. Jurnal Penelitian Pascapanen Pertanian, 1(1), 29–37. https://doi.org/10.21082/JPASCA.V1N1.2004.29-37.
Sabda M, Wulanningtyas HS, Ondikeleuw M, Baliadi Y. Karakterisasi potensi gembili (Dioscorea esculenta L.) lokal asal papua sebagai alternatif bahan pangan pokok (characterization of potential local gembili (Dioscorea esculenta L.) from Papua as alternative of staple food). Direvisi: 21 Februari, 49.
Simatupang M, Jamaludin, Witdarko Y. 2021. Effect of blanching treatment on gembili flour quality (Diocorea Esculenta L.). Musamus AE Featuring Journal. 4 (1): 19–26. https://ejournal.unmus.ac.id/index.php/ae/article/view/4827.
Tardzenyuy ME, Jianguo Z, Akyene T, Mbuwel MP. 2020. Improving cocoa beans value chain using a local convection dryer: A case study of Fako division Cameroon. Scientific African, 8, e00343. https://doi.org/10.1016/J.SCIAF.2020.E00343.
Waluyo S, Saputra TW, Permatahati, N. 2021. Mempelajari karakteristik fisik biji kakao (Theobrema cacao L.) pada suhu pengeringan yang berbeda. Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering). 10 (2): 200–208. https://doi.org/10.23960/JTEP-L.V10I2.200-208.
Witdarko Y, Bintoro N, Suratmo B, Rahardjo B. 2015. Pemodelan pada proses pengeringan mekanis tepung kasava dengan menggunakan pneumatic dryer: hubungan Fineness Modulus dengan Variabel proses pengeringan. AgriTECH. 35 (4): 481–487. https://doi.org/https://doi.org/10.22146/agritech.9333
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
1. Copyright on any article is retained by the author(s).
2. The author grants the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the works authorship and initial publication in this journal.
3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journals published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License
